Telephony
Interface
Call Control DTMF
Loop Current 40mA off hook
Line impedance 600-ohm complex
Ring Voltage 70Vrms
Ring Load REN 4
CLIP Bellcore FSK
Line Voltage 48V on hook
GSM Interface
Bands E-GSM 900MHz
GSM 1800MHz
GSM Phase 2+
Transmit Power Class 4 (2W) for E-GSM 900MHz
Class 1 (1W) for GSM 1800MHz
Speech Codecs Half Rate (ETS 06.20)
Full Rate (ETS 06.10)
Data Rate 2400, 4800, 9600 Baud
SIM Card 3V
Antenna Integral Omni directional Antenna with SMA connector
for external antenna option
Physical Interfaces
Telephone Analogue / RJ11 or BT603 option
Data Port RS232 / RJ45 with DB-9 converter
GSM Antenna Gold plated SMA male
SIM Card 3V Small card retained under rear panel
Indication 2 x LED indication for power / Transmission Status
Approvals
CE Certification to R & TTE directive 1999/5/EC
GSM Certifications:
ETS 300 607-1 Digital Cellular Telecommunications system
EN 301 419-1 Global System for Mobile communication
ETS 300 342-1 Radio Equipment and Systems
Power Supplies
Primary 110-240Vac @ 47-63Hz
GSM Antenna Gold plated SMA male
|
Features
Overview
- High
Ringer Equivalence POTS Interface supports up to 4 additional
extensions
- Highly
compatible POTS & PABX interface
- Bellcore
Caller Line ID Presentation
- GSM
Network features supported (subject to network support)
- Selectable
Dial tone and Ring cadences
- RS232
Data port for emails/web and PC faxes
- SIM
lock
- Network
lock
- Remote
Software Upgrade
- Off-hook
howler
- External
Antenna facility
Physical
Specification
Height 150 mm
Width 122 mm
Depth 42 mm
Weight 460gm
|