Pinger Plus Network IP Tester
	Connect Pinger Plus and the inbuilt DHCP client will automaticaly configure the tester for immediate use on your network. Immediately begin PINGin local or remote IP devices with the first tester to provode Gigabit over copper link testing. Use the powerful PING range features to find available IP address. The profile features allows up to eight different test setups (including source and destination IP address, subnet mask and gatewayaddress) to be pre-programmed. Having Profiles allows a user to quickly test large networks with multiple VLANs. The pinger Plus also identifies reversed polarity for improperly connected wired pairs and provides a Port identification feature with selectable blink rates to identify which port on a HUB or Switch that a wall outlet is connected.Pinger Plus is essential for the smooth operation for today's networks. Detect and decode 10/100/1000 Links Signals DHCP Client allowing Automatic Configuration Verifies connectivity accross a LAN or WAN by Transmitting/Receiving Pings Measure packet response time to determine network performance Provides MAC address of an IP Address Transmits link activation signal for port ID Ability to store multiple rofiles with up to Eight IP Addresses per profile Web browser or keypad configuration ability